Coating system engineering of surface treatment equipment
National consultation hotline 0769-2208 8551
As we all know, the current automobile wheel hub spraying process is generally as follows: pretreatment → primer → drying → polishing → primer → paint → drying → transparent powder → drying. The purpose of spraying primer is to ensure the smoothness and stone strike resistance of the substrate surface, but what problems will occur if the primer free process is used in the spraying process of automobile wheel hub?
In the traditional process, the primer and color paint are sprayed wet by wet. In the spraying process, the solvent volatilization is less. When the primer is not applied, the color paint and solvent are more likely to volatilize, so the paint film defects such as blooming are easy to occur at the corners. Considering the insufficient covering power of the paint itself, in order to achieve good leveling and appearance and reduce the defects of the paint film, it is more difficult to optimize the spraying angle and parameters than the primer spraying.
Dongguan Jinlong mechanical equipment Co., Ltd
Factory address: No.2 Xiangfu Road, quantang Industrial Zone, Liaobu Town, Dongguan City, Guangdong Province
Technology Center: room 602, building A3, Songhu Zhigu R & D center, No.1 renju Road, Liaobu Town, Dongguan City, Guangdong Province
Copyright © 2021 Dongguan Jinlong mechanical equipment Co., Ltd